KENT JHU-27100NC CYLINDRICAL GRINDER, NEW 2015, NEVER USED CATALOG SPECIFICATIONS Max. Grinding Length 40" Max. Work Swings 10.6" Max. Load Between Centers 154 LBS Max. External Grinding Diameter 9.8″ Grinding Wheel O.D. x Width x I.D. 16″ x 2″ x 5″ Grinding Wheel Speeds (2 Range Pulley) RPM 1500 RPM, 1600 RPM Workhead Spindle Swivel Angle 120° Workhead Spindle Center Taper M.T. # 4 Workhead Spindle Spindle Rotation Forward & Reverse Workhead Spindle Speed Range 11-500 RPM Tailstock Taper M.T. #4 Table Swivel Angle -11°, +6° Table Traverse Speed 1.96"-157"/min Worktable Min Travel 0.31" Hand Wheel Feed/Revolution 0.79" Wheel Spindle Motor 5 HP / 4 P Workhead Spindle Motor 0.5 HP / 4 P Hydraulic Pump Motor 2 HP / 4P Wheel Spindle Lubrication Pump Motor 1/4 HP / 4 P Coolant Pump Motor 1/4 HP / 4 P Internal Grinding Spindle Motor 2 HP / 2 P X Servo Motor 1.3 HP Y Servo Motor 2 HP Wheel Spindle Lubricant Tank 5.8 Gal. Hydraulic Fluid Tank 15.9 Gal. Coolant Tank 26.5 Gal. Net Weight 6930 lbs Packing Dimensions 110" x 65" x 72" Features Nitride hardened, super-finished spindle Variable speed workhead rotates 90° CCW and 30° CW Rapid advance and retract of wheel head allows for quicker setup and check of grind-in dimensions Hydraulically driven longitudinal traversal Manual infeed for H model; manual and automatic infeed with plunge cycle on NC model Advanced Hydrostatic Lubrication System