SUNNEN PRECISION POWER STROKING HONING MACHINE Model ML-4000D Year 2010 SPECIFICATIONS: MANUAL STROKE DIAMETER .................... 0.060" TO 6.500" POWER STROKE DIAMETER ..................... 0.060 TO 4.000" AUTOMATIC SIZING DIAMETER ................. 0.125" TO 2.000" STROKE LENGTH ............................. 0.236" TO 6.700" SPINDLE SPEEDS ............................ 200 TO 3000 RPM STROKE RATE ............................... 60 TO 500 SPM (FINE INCREMENTS) SPINDLE MOTOR ............................. 5.5 HP STROKER MOTOR ............................. 1.5 HP PUMP MOTOR ................................ 1/2 HP COOLANT PUMP .............................. 3 GALLONS PER MINUTE COOLANT CAPACITY .......................... 32 GALLONS Light Curatins FLOOR SPACE ............................... 64" X 48" X 75" HIGH MACHINE WEIGHT PLUS COOLANT CART .......... 1,875 LBS. EQUIPPED WITH: FULLY AUTOMATIC CYCLE AUTOMATIC STONE WEAR COMPENSATOR FEED REGULATOR SYSTEM "For special applications, the feed regulator system can be used to improve stone life or to set the machine to a constant feed rate." DUAL FEED PRESSURE SYSTEM, ROUGH & FINISH IN ONE OPERATION MAXIMUM FEED PRESSURE FLEXIBILITY "Two-stage feed pressure feature, the operator can reduce cycle time by removing the bulk of the stock at a high feed pressure and ?nishing at a lower pressure. Pressure settings range from 1 to 16. The operator selects the stock removal and pressure for each stage. Maintains accuracy along with improved cycle time." RIGID MACHINE BASE ELECTRONIC CONTROL SYSTEM AUTO POWER STROKING AUTO SIZING CAPABILITY (MUST PURCHASE PLUGS/ACCESSORIES FROM SUNNEN) DETACHABLE COOLANT CART SYSTEM 3/60/230-460 ELECTRICS Note: Catalog Specs